French furniture part 2 - La commode

 Otherwise translated as a chest of drawers.

A side view in situ

This piece was quite large, not sure of the age (again more knowledgable readers could suggest a originating period) and worn in several places. It had veneer in several places and really was in need of sympathetic expert restoration. Essentially it comprised a base unit with 4 wide drawers, and upper unit with a mirror and two integral small drawers.
The top was damaged probably by water and the veneer was missing in several places.
The bottom has some turned features with interesting square details ending in turned feet.

Nicely proportioned chest
of drawers with ornate
mirror unit on the top

One thing that shows the integrity of a dovetail joint was that most of the drawer fronts no longer had any glue but still the handcut dovetails were as strong as the day they were made.

French furniture part 1 - La table de chevet

I start a series of some interesting furniture I have found in my travels around France in the September of 2014.

La table de chevet

Here is a good example of a bedside table that shows the importance of trying to keep woodworm in check.

The piece is an antique of unknown age, (maybe a knowledgeable reader could supply the period of manufacture), it has wonderful pierced cabriole legs, a shaped top and a single lockable drawer in the front apron. The dovetails in the drawer were all handcut and the base was made from 3 boards of oak glued together and roughly cut to fit in grooves cut into the drawer sides and front.

On the face of it the table looks fabulous

Garden Gate Project - Part 9 - Carving letters and numerals

There is a New Yankee Workshop episode (Season 17 episode 12) where Norm Abram showed how to make carved wooden signs.



This was a really interesting show where Norm was showing how to cut letters and numerals in several ways:

• By hand using carving tools
• By CNC machine
• By hand using a router.

Garden Gate Project - Part 8 - Shaping the stiles

As the top of the stiles had been left cut longer it was a simple job to mark out and cut the tops.
I was going to make a template to do this but found an ideal one in my drafting equipment. It is an acrylic protractor. It is the exact size I wanted.

First of all I marked out some base lines 40mm (just over 1.1/2") up from the top of the upper mortise. Then I marked out another line 60mm (just under 2.3/8") further on from this line. Then I simply joined the dots. I projected this around to the other face and marked that too. This is just as a visual reminder when cutting. You don't want to cut the wrong piece out at this stage!

A protractor used to mark out the curve